Labconco™ Basic™ Laboratory Hood

For areas with low ceilings or narrow aisles, choose the Basic™ Laboratory Hood when outfitting your lab.

Catalog Number	Mfr. No.	Width (English)	Includes	Voltage	Configuration Options
16-080-9	Labconco™ 2246601	47 in.	No Blower	208/230 V	Unassembled
16-080-12	Labconco™ 2246604	47 in.	Integral Blower	220 V	Unassembled
16-080-14	Labconco™ 2246606	47 in.	Integral Explosion-proof Blower	220 V	Unassembled
16-080-22	Labconco™ 2247301	47 in.	Integral Blower	220 V	Fully Assembled
16-080-23	Labconco™ 2247401	47 in.	No Blower	208/230 V	Fully Assembled
16-080-24	Labconco™ 2247501	47 in.	Integral Explosion-proof Blower	230 V	Fully Assembled
16-080	Labconco™ 2247400	47 in.	–	100/115 V
16-080-1	Labconco™ 2247500	47 in.	Integral Explosion-proof Blower	115/208/230 V	Fully Assembled
16-500-10	Labconco™ 2247300	47 in.	Integral Blower	115 V	Fully Assembled
16-080-7	Labconco™ 2246501	70 in.	Integral Explosion-proof Blower	230 V	Fully Assembled
16-080-19	Labconco™ 2246704	70 in.	Integral Blower	220 V	Unassembled
16-080-16	Labconco™ 2246701	70 in.	No Blower	208/230 V	Unassembled
16-080-21	Labconco™ 2246706	70 in.	Integral Explosion-proof Blower	220 V	Unassembled
16-080-6	Labconco™ 2246500	70 in.	Integral Explosion-proof Blower	115/230 V	Fully Assembled
16-080-2	Labconco™ 2246300	70 in.	Integral Blower	115 V	Fully Assembled
16-080-3	Labconco™ 2246301	70 in.	Integral Blower	220 V	Fully Assembled
16-080-5	Labconco™ 2246401	70 in.	No Blower	208/230 V	Fully Assembled
S28126	Labconco™ 2247400/EMD	47 in.	No Blower	100/115 V	Fully Assembled

Description

For areas with low ceilings or narrow aisles, choose the Basic™ Laboratory Hood when outfitting your lab.

• By-pass airflow design
• Durable epoxy-coated 16 gauge steel exterior and interior resists chemical exposure
• LED lighting
• Vertical-rising tempered safety glass sash
• Adjustable two-piece baffle
• Curved air foil
• Right side fixture panel factory-prepared to accept up to three service fixtures, one electrical duplex and one airflow monitor (kits sold separately)
• Right interior wall factory-prepared for one cupsink and turret (cupsink and turret kit sold separately)
• Epoxy-coated steel 10.31 in. OD exhaust connection

Order Info

Exterior D x H: 25 x 48 in. (64 x 122 cm). Add 5 in. (12.7 cm) to height for models with built-in blower. Available with or without blower. Blower may be mounted in hood liner, above hood, or at remote roof location.

Specifications

• Certifications/Compliance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, NFPA 45, SEFA 1, UL
• Color: Glacier White
• Depth (English): 25 in.
• Depth (Metric): 63.5 cm