Glass Vacuum Manifolds
Glass Vacuum Manifolds
Chemglass Life Sciences Vacuum Manifold, Right Handed, 4 Ports, 4mm PTFE Stopcock
Vacuum Manifold, Right Handed, 4 Ports, 4mm PTFE Stopcock.
Chemglass Life Sciences 4-Port Vacuum Manifold, Left Handed Trap Assembly, Double Bank, Airfree, Schlenk
4-Port Vacuum Manifold, Left Handed Trap Assembly, Double Bank, Airfree, Schlenk. Complete system consists of one 4-port vacuum/inert manifold, one pre-trap, one main trap assembly, one main trap body, two CG-150-05 #28 S.S. pinch clamps, one CG-150-08 #50 S.S. pinch clamp, one CG-150-21 #75 S.S. pinch clamp, four CG-150-04 #18-L S.S. pinch clamps, one AF-0451-05 #9 o-ring joint cap stopper, one AF-0451-21 #30 o-ring joint cap stopper, three AF-0451-08 #9 o-ring joint to 3/8" tubulation for Cajon adapters, four CG-305-12 #112 Viton o-rings, and one CG-305-32 #223 Viton o-ring.
Chemglass Life Sciences 4-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, 510mm OAL
4-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, 510mm OAL. Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging or sealed with AF-0210 stoppers. All connection ports are #15 o-ring joint connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap plug is listed below.
Chemglass Life Sciences 5-Port Vacuum Manifold, Right Handed Trap Assembly, Double Bank, Airfree, Schlenk
Line has 5-ports w/4mm high vacuum stopcocks having a 24/40 inner joints w/ hooks just above grind. Ports are spaced 150mm center to center & have rod bracing to vacuum bank. 40mm ID vacuum bank evacuates vessels up to 1000ml. End of vacuum bank has 35/25 ball joint & supplied w/socket joint cap style stopper. Valved gauging port is placed on main vacuum line & has a 12/5 ball joint. Inert gas line has 2-ports for connection of inert gas source & bubbler. End of inert gas line has a 14/20 inner joint & is supplied w/a joint cap style stopper. Pre-trap is 51mm OD x 250mm long w/ two 28/15 socket joints. Main trap body is 58 mm OD x 235mm long w/a reversed 75/50 ball & socket joint connection. A valved gauging port is placed between main & pre-trap. Spacing between the two traps is 175mm for easy placement of dewar flasks. OAD: 40" W x 24" H. Also supplied w/ two #28 S.S. pinch clamps, one #35 S.S. pinch clamp, one #75 S.S. pinch clamp, & two 1/2" S.S. springs.
Chemglass Life Sciences Vacuum Manifold, Right Handed, 3 Ports, 0-4mm Chem-Cap Valve, 240mm Overall width
Vacuum Manifold, Right Handed, 3 Ports, 0-4mm Chem-Cap Valve, 240mm Overall width. General purpose single bank vacuum manifold with 3 ports. Main tube is 38mm OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are 0-4mm Chem-Vac Chem-Cap valves with serrated hose connections. The 0-4mm has the smallest serration 10mm and the largest serration 11mm. Ports are spaced 60mm center to center for the 0-4mm.
Ace Glass, Inc. Glass manifold with three 0-4mm high vacuum, easy action stopcocks, 232mm overall length, #15 Ace-Thred™; ends
Glass manifold with three 0-4mm high vacuum, easy action stopcocks, 232mm overall length, #15 Ace-Thred™; ends
Ace Glass, Inc. Vacuum manifold with five variable opening, 0-10mm high vacuum threaded stopcock ports. 375mm overall length with right side hose connection. PTFE plugs with UHDPE handles.
All-glass-and-PTFE vacuum manifold with five right side stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied.
Ace Glass, Inc. Vacuum manifold, 310mm long, (3) stopcock ports with 24/40inner joints
310MM 24/40 3PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 520mm long, (3) stopcock ports with #15 O-ring joints
520MM NO.15 3PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 730mm long, (4) stopcock ports with 14/20 inner joints
730MM 14/20 4PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 500mm long, (3) stopcock ports with 14/20 inner joints
500MM 14/20 3PRT MANIFOLD
Ace Glass, Inc. Double tube vacuum manifold, 730mm long, (4) stopcock ports with 24/40 inner joints
730MM 24/40 4PRT MANIFOLD
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (5) #7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (5) #7 Ace-Thred ports
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred ends, 36inch length, (8)#7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred ends, 36inch length, (8)#7 Ace-Thred ports
Ace Glass, Inc. Walters type manifold system including trap, featuring Ace-Thred connections and PTFE high vacuum valves
Walters type manifold system including trap, featuring Ace-Thred connections and PTFE high vacuum valves